Linksys Max-Stream AC2200 MU-MIMO Tri-Band WiFi Router (MR8300)

The MR8300 is an AC2200 tri-band router equipped for rates of up to 400Mbps on the 2.4GHz and 867Mbps on every one of the two 5GHz groups of setup. It is controlled by a quad-center CPU, 512MB of RAM, and 256MB of flash memory, and it bolsters MU-MIMO synchronous information spilling, direct-to-customer signal beamforming, and Smart Connect (programmed band-guiding). It uses Velop work innovation to permit you to assemble a Wi-Fi system using any Velop hub, however, to do so the MR8300 must go about as the principal (essential) hub that interfaces straightforwardly to your modem.

Advanced features of Linksys MAX-Stream AC2200 (MR8300) MU-MIMO Wi-Fi Router

Linksys MAX-Stream AC2200 (MR8300) MU-MIMO Wi-Fi Router
  • The Enabled with AC2200 MU-MIMO innovation with tri-band and Gigabit Ethernet ports (400+867+ 867) Mbps of speed.
  • Can take a shot at 802.11a/b/g/n/air conditioning with extraordinary and equivalent productivity.
  • Get three groups 2.4 GHz and 2-5.0 GHz groups for tri-band availability.
  • Get four high intensification radio wires with a flexible structure.
  • Empowered with a 716 MHz quad-center processor for the quickest availability.
  • It very well may be used as a wireless router and Access point.

Linksys MR8300 Mesh Router Login Setup

To start the way toward setting up for login MR 8300 router you have to set up it as the essential hub in any entire work Wi-Fi system. What’s more, to do so you have to connect the essential hub with an Ethernet connection to the modem or modem router. Then again, optional hubs can be connected through remote or Ethernet connection. Follow the offered steps to finish the arrangement:

  • In the foremost open an internet browser from a PC or device that is connected with your router.
  • Type in the location bar. It will open up a login validation page.
  • Type the default accreditations in the username and secret word content fields in the event that you have not changed the secret key.
  • The default login admin credentials for username and secret phrase is the administrator.
  • Then hit the Press enter.
  • If you have effectively signed in, it will guide you to a BASIC landing page.

How to Sign In to Linksys Smart Wi-Fi By Using Linksys App?

To finish the login procedure of setup MR8300 Mesh router AC2200 you can utilize the Linksys App and change all necessary remote settings which incorporate parental control and security. Access the settings from anyplace with web connections and oversee your home system. To get to the system you have to do the login into MR8300 AC2200 work router, follow the beneath characterized steps:

  • In the foremost case, you will need to download the Application and then open the application.
  • Here you will need to enter the register email address.
  • Select the Login button.

How to Reset the MR8300 Router?

To reset the username and password of login, you can reset your router to return to the production line settings of To perform configuration factory reset settings, you can follow the beneath referenced advances:

  • In the foremost case, you will need to reset the Linksys router, you have to press the reset button for 30 seconds.
  • When you press the to reset button, unplug and re-plug the routers capacity connector.
  • To reestablish the default settings of the Linksys router.
  • Sign in to the administrator page using or
  • Here you will need to enter the username and password to redirect to the login admin page.
  • On the admin page go to the organization.
  • Under the organization tab, select Factory Defaults sub-tab.
  • Under Factory Defaults sub-tab, select Restore Factory Defaults.
Leave a Reply

Your email address will not be published. Required fields are marked *